Архив за 15 Окт 2010

Спецификация на генераторы Agilent семейства 81100 (Pulse Pattern Generators)

Опубликовано 15 Окт 2010 | Рубрика Agilent, Spec's & DataSheets | Просмотров: 51

  • Название: Agilent Technologies 81100 Family of Pulse Pattern Generators
  • Автор: Agilent
  • Тип документа (версия): Technical Specifications (Version 1.2)
  • Язык: ENG
  • Формат: PDF
  • Размер: 282 КБ

Краткое описание:

The Agilent 81101A, 81104A, 81110A and 81130A generate all the standard pulses and digital patterns needed to test current logic technologies (CMOS, TTL, LVDS, ECL, etc.).
With the optional second channel on all of the models from 80 MHz to 660 MHz, multi-level and multi-timing signals can be obtained using the internal channel addition feature.
- variable pulse parameters in pattern mode as well as in pulse mode (not on the 81130A);
- synchronously triggerable;
- simulation of reflections/distortions (81104A, 81110A);
- three/four-level codes (81104A, 81110A).

Далее...

Справочное руководство Agilent 81130A 400/660MHz Pulse/Data Generator

Опубликовано 15 Окт 2010 | Рубрика Agilent, Guides & Manuals | Просмотров: 47

  • Название: Agilent 81130A 400/660MHz Pulse/Data Generator
  • Автор: Agilent
  • Тип документа: Reference Guide
  • Язык: ENG
  • Формат: PDF
  • Размер: 0,98 МБ

Краткое описание:

This guide provides reference information primarily for programming the Agilent 81130A via remote control.
Chapter 1 “General Programming Aspects” on page 13 gives general hints for programming instruments like the Agilent 81130A using SCPI commands.
Chapter 2 “Programming Reference” on page 25 provides detailed information on the SCPI commands supported by the instrument.
Chapter 3 “Specifications” on page 95 lists the instrument’s technical specifications and provides exact definitions for the instrument’s parameters.
For an introduction and information on the Agilent 81130A’s user interface, please refer to the Quick Start Guide, p/n 81130-91020.

Далее...